Support   |   FAQ  |  Contact us





SN56000 is a 4-ch wave-table melody synthesizer IC with 8-bit Push-Pull direct drive circuit. It built-in a 4-bit tiny controller with I/O ports supported up 16. By programming through the tiny controller, user¡¦s varied applications including voice section combination, key trigger arrangement, output control, and other logic functions can be easily implemented.


Item P/N No. of channel ROM RAM Port Duration
*10-bit *4-bit i/p +i/o+ o/p 6k 8k
SN52010 SXC5220KDxxx 2 32K 64 0 + 4 + 0 10 7
SN52020 SXC5250KDxxx 64K 64 0 + 4 + 0 20 16
SN56121   4 384 256 0 + 24 + 0    
SN56169   512 256 0 + 16 + 0 168 128
SN56012 SXC5634KDxxx 40K 128 0 + 16 + 0 12 10
SN56016 SXC5644KDxxx 52K 128 0 + 16 + 0 16 13
SN56020 SXC5654KDxxx 64K 128 0 + 16 + 0 20 16
SN56030 SXC5664KDxxx 96K 128 0 + 16 + 0 30 24
SN56040 SXC5674KDxxx 128K 128 0 + 16 + 0 40 32
SN56060 SXC5684KDxxx 184K 128 0 + 16 + 0 60 46
SN56085 SXC5694KDxxx 256K 128 0 + 16 + 0 85 64
SN56120 SXC56A4KDxxx 384K 128 0 + 16 + 0 120 96
SN56168 SXC56B4KDxxx 512K 128 0 + 16 + 0 168 128
SN56268 SXC56C4KDxxx 810K 128 0 + 16 + 0 268 202
SN56340 SXC56D4KDxxx 1M 128 0 + 16 + 0 340 250

Development Tools:
Hardware: EV Board, Keyboard, OTP
Software: Compiler


Compiler ver 1.32
  Compiler for SN56000 series
 
Flash Writter
 


ASSEMBLY ver 1.6
  Assembly program menu
 
SN56K Sample Rate
 
EASY ver 1.6
  Easy program menu
 
EV Board Setup ver 1.2
  Easy program menu
 
Application Note ver 1.0
  Application Note for SN56000 EV/OTP board and Real Chip
 
KODEC W29C040 adaptor board programming procedure
  Programming guide for KODEC W29C040 adapator board
 
Flash Board Burning/Programming Procedure
  Programming procedure for Flash board
 
Bonding Diagram  
  Bonding diagram